24/7 emergency call-outs · door stuck open, off its tracks or won't closeCall 0490 410 296

Real jobs · Brisbane north and Moreton Bay

Our garage door projects

A selection of jobs we’ve done: new doors, openers mounted properly where the garage made it tricky, and doors re-aligned so they close flush.

Recent jobs

Cracked top corner bracket tearing away from a sectional garage door panel
RepairTop bracket cracked throughThe bracket at the top corner of the door had cracked and was tearing away from the panel.
New top bracket and roller bolted over a steel reinforcing plate on a garage door
RepairCracked top bracket rebuiltWe fitted a steel plate over the damaged corner and bolted on a new top bracket and roller.
SuperLift garage door opener installed on ceiling brackets with the door open
Opener installationNew opener on ceiling bracketsA new SuperLift opener mounted on ceiling brackets, with the rail and emergency release set up.
Custom steel bracket made to remount a garage door opener that had been fixed to the cornice
Opener repairFixing another installer's shortcutThe opener had been fixed straight to the cornice. We made a custom bracket so it's mounted properly.
Two dark grey roller garage doors between brick piers
InstallationDouble carport doorsAutomatic garage doors installed across a two-bay carport.
White raised-panel lift garage door on a paved driveway
RepairDoor that wouldn't close flushRe-aligned an automatic garage door that wasn't shutting flush with the ground.
Torsion spring centre bracket re-fixed on a steel backing plate above a garage door
RepairSpring bracket torn out of the wallThe centre spring bracket had pulled out of the wall above the door. We fitted a steel backing plate and re-fixed the bracket so the spring tension is properly supported.
Inside a single garage: panel lift door with opener and torsion spring
InstallationSingle garage door and openerSingle garage door installed with an automatic opener.
Newly installed garage door opener in a white garage
InstallationOpener fitted to a carport doorOpener installed as part of a two-bay carport door job.
Inside view of a double panel lift garage door with struts and opener rail
RepairDouble door re-alignedRe-aligned a double automatic door that wasn't shutting flush.
Cream panel lift garage door fitted in a brick garage
InstallationManual door replaced with an automatic oneReplaced a damaged manual door with a new single-bay automatic garage door.
Garage door opener rail hung from custom steel brackets where the roof had no fixing points
InstallationNo fixing points in the roofThe roof had nothing to fix the opener to, so we hung the rail from custom steel brackets.
Garage door opener mounted on a steel frame below the ceiling
InstallationOpener on a steel frameOpener mounted on a steel frame below the ceiling.
Rendered home with a cream flat-panel double garage door and a Colorbond roof

Have a job for us?

Call any time, or send a photo with the quote form.

Call nowGet a quote