24/7 emergency call-outs · door stuck open, off its tracks or won't closeCall 0490 410 296

Openers · Motors · Remotes

Garage door openers, motors and remotes, Moreton Bay and Brisbane north

Opener not responding, remote stopped working, or ready to automate a manual door? We repair, replace and install openers, and program new and spare remotes.

SuperLift garage door opener and rail installed in a single garage

Opener and remote problems we fix

Remote programming

A remote that has stopped working isn’t always faulty. Before you call:

Change the battery

It's the most common cause.

Check lock or holiday mode

Many wall controls have a lock button that blocks all remotes.

Try the wall button

If that works but the remote doesn't, the remote probably needs re-coding to the opener.

We program new and spare remotes to most openers, and can clear lost remotes from the opener’s memory so they no longer open your garage. If you have a B&D Controll-A-Door opener (GDO-6v3), our GDO-6v3 remote programming guide walks through doing it yourself.

Repair or replace

Repair or replace your opener?

Openers wear out like any motor. A repair makes sense when the problem is a part such as a drive gear, a logic board, a limit setting or the safety beams.

Before blaming the opener, we always check the door itself. An opener straining against a door with tired springs will keep failing until the door is balanced. See garage door repairs.

Replacement is usually better when:

  1. The opener is old and parts are no longer available.

  2. It struggles to lift a door that is otherwise balanced.

  3. It doesn't have a reliable safety-reverse.

  4. You want features it can't offer, such as phone control or battery backup.

Installing an opener

We fit openers to existing doors and to new ones. Each install includes mounting the motor and rail securely, setting the travel limits and force, aligning the safety beams where fitted, programming your remotes, and showing you how to use the manual release.

Some garages make mounting tricky: no fixing points in the roof, a raked ceiling, or a previous opener screwed straight into the cornice. In those cases we make up proper brackets so the opener is secure. Two of our recent jobs below show exactly that.

Garage interior with a panel lift door and a ceiling-mounted opener

Recent opener jobs

SuperLift garage door opener installed on ceiling brackets with the door open
Opener installationNew opener on ceiling bracketsA new SuperLift opener mounted on ceiling brackets, with the rail and emergency release set up.
Custom steel bracket made to remount a garage door opener that had been fixed to the cornice
Opener repairFixing another installer's shortcutThe opener had been fixed straight to the cornice. We made a custom bracket so it's mounted properly.
Inside a single garage: panel lift door with opener and torsion spring
InstallationSingle garage door and openerSingle garage door installed with an automatic opener.

How it works

Call or send details

Tell us the opener brand if you know it, and what it’s doing.

We check door and opener

We test the door by hand first, then the opener and safety settings.

You get a quote

Repair or replacement options, priced before we start.

We fix or fit it

We repair or install, program your remotes and test it with you.

Brands

Brands we work with

We work with the major garage door and opener brands used on Brisbane homes.

What customers say

FAQs

Opener and remote questions

Can’t see your question? Call us on 0490 410 296, any time.

In most cases, yes. Tell us the brand and model of your opener (usually on a label on the motor) and we’ll confirm which remote you need.

Most openers let you clear all remotes from memory and re-code the ones you still have. We can do this for you, or talk you through it for your model.

The drive may be disengaged (check the manual release), a drive gear may have stripped, or the door may be jammed. Don’t keep running it. Call us and we’ll check both the door and the opener.

Usually, as long as the door is in good condition and balanced. We’ll check the door first and let you know if anything needs fixing before the opener goes on.

Yes. We fit openers to tilt doors, and we service and repair them too, including tilt door springs, J-arms and locking mechanisms.

Often the safety beams are blocked, dirty or out of line, or the close-force setting is too sensitive. It can also be a sign the door is binding. We check all three.

Get an opener or remote quote

Tell us the opener brand and model if you can see it on the motor.

    A photo of the door or the problem helps us quote. JPG, PNG or HEIC, up to 8 MB.

    Prefer to talk?

    We answer calls 24 hours a day, 7 days a week.

    Call nowGet a quote